TAILHOUSING IDENTIFICATION

Casting # Picture

Application

DKT
 

1964-65 Falcon
1964-73 Mustang, Cougar
1966-68 Fairlane, Cyclone, Ranchero, Torino 289, 302, 390
1966-69 Falcon 289, 302
1966-69 Mustang, Cougar  390
1967 up Fairlane, Cyclone 427, 428
1968-69 Mustang 428, 429
14" length, 28 or 31 spline

C4AR-7A040 A

1964-67 Galaxie 289, 390
17" length, 28 spline
C4DR-7A040 A 1964-65 Falcon
front shifter mounting  holes drilled and tapped.
14" length, 25 or 28 spline
C4DR-7A040 A 1964-73 Mustang, Cougar
rear shifter mounting holes drilled and tapped and front lower shifter mounting pads milled off.
14" length, 25 or 28 spline
C4OR-7A040 A 1964 and 65 Fairlane, Tiger, Grifit, TVR
15 1/2" length, 28 spline
C4ZR-7A040-A 1964-73 Mustang, Cougar 289, 302, 351 engines
14" length, 25 or 28 spline
RF-C6AR-7A040-B 1966-67 Galaxie 427, 428
17" length, 31 spline
C6OR-7A040-C
&
C7OR-7A040-A
1966-68 Fairlane, Cyclone, Ranchero, Torino 289, 302, 390
1966-69 Falcon 289, 302
1966-69 Mustang, Cougar  390
14" length, 28 spline
C6OR-7A040-C
&
C7OR-7A040-A
1967 up Fairlane, Cyclone 427, 428
1968-69 Mustang 428, 429
14" length, 31 spline
RF-C8AR-7A040-B 1968-69 LTD, Galaxie, Custom 390
17" length, 28 spline
RF-C9AR-7A040A 1969 Galaxie, Custom 429
17" length, 31 spline
C9OR-7A040-A 1969 up Cyclone, Torino, Ranchero 302. 428, 429
17" length, 31 spline
DOZR-7A040-A 3 front shifter mounting holes drilled and tapped.
Same as shifter location as C6O & C7O
14" length, 28 spline
DOZR-7A040-A   3 rear shifter mounting holes drilled and tapped.
70-71 Mustang, Cougar 428, 429, Boss 429
14" length, 31 spline
 
Site Map
© 2015 David Kee Toploader Transmissions, Inc.